We will exhibit at "Secutech" held in Taiwan.>>read more
Flames will not wait.The flame detector“Matoi”operates at the moment when a small flame comes out and surely sounds an alarm.
PRODUCTS
UVS-05BS-01
“Matoi”, UVS-05BS-01, is simple type flame detector that detects ultraviolet rays contained in flames quickly and issues a warning.
“Matoi” warns or announces a sound when detecting a flame such as arson in a place where fire should not occur, such as non-smoking place or fire-prohibited place. “Matoi” is effective for preventing fire, monitoring non-smoking areas and preventing arson.The power supply uses 4 AA alkaline batteries, and it can operate for about 2 years in the standby mode.Since the mounting base can be separated, it is also easy to maintain.
Option Item: Lithium battery (Battery Life: about 5 years)
Compatibility:“PiCOEYE”,UVS-01BB, UVS-03BV, UVS-05BV, UVS-05BS
UVS-C
“Matoi”, UVS-C, is centrally managed flame detector that detects ultraviolet rays contained in a flame quickly, issues a sound alarm and outputs contact at the same time.
After the alarm, the detector keeps lit red for 50 minutes, so even if more than one detector is installed on one line, it is possible to identify the alarmed detector at scene of the fire.Because it is wiring type, it can interlock with other equipment as well as remote monitoring.When connecting to the centralized receiving device, PCP-10, the corresponding line is displayed and will be notified by buzzer.
Up to 100 detectors can be connected with 10 lines.
Compatibility: “PiCOEYE”, UVS-02CTB, UVS-04CTV, UVS-06CTV, UVS-06CS
PCP-10
The flame monitoring receiver, PCP-10, is dedicated receiver for centrally managing the flame detector. When the sensor detects a flame, 85db buzzer warning is issued on the receiver, and it will inform you by LED blinking indication of the corresponding line.
Up to 100 detectors are possible when connecting “Matoi”, UVS-C.
If you are thinking of installing the flame detector “Matoi”, please feel free to contact us first.
“Matoi” is the flame detector that detects ultraviolet rays contained in flames quickly and issues a warning. “Matoi” warns or announces a sound when detecting a flame such as arson in a place where fire should not occur, such as non-smoking place or fire-prohibited place. “Matoi” is effective for preventing fire, monitoring non-smoking areas and preventing arson.
Examples
Monitor Non-Smoking Area
In Restroom
In Hospital (Hospital room)
Arson Prevention
At Clothing & Bedding Department
In Warehouse / Garbage area
Fire Prevention
In Factory (Manufacturing line)
In Kitchen (Electric stove)
Voice alarm in Japanese, English, Korean, Chinese
It is too late, once the FIRE has started.
It works at the moment when a small flame comes out and surely warns you.
Senses even distant small flame
It instantly detects 3cm flame from a distance of 4m, and the detection distance extends in proportion to size of flame.
Every angle covered with 1 “Matoi”
Detection area with radius of about 2.5m
Ceiling height of installation location 3m
Detection area about 20m²
(Measurement at height from the ground, about 1m)
Reliable Operation in any Environment
Improve performance such as Impact and Humidity
Reduce the influence of strong ultraviolet rays other than flames (Compared with our products)
PRODUCTS
UVS-05BS-01
“Matoi”, UVS-05BS-01, is simple type flame detector that detects ultraviolet rays contained in flames quickly and issues a warning.
“Matoi” warns or announces a sound when detecting a flame such as arson in a place where fire should not occur, such as non-smoking place or fire-prohibited place. “Matoi” is effective for preventing fire, monitoring non-smoking areas and preventing arson.The power supply uses 4 AA alkaline batteries, and it can operate for about 2 years in the standby mode.Since the mounting base can be separated, it is also easy to maintain.
Option Item: Lithium battery (Battery Life: about 5 years)
Compatibility:“PiCOEYE”,UVS-01BB, UVS-03BV, UVS-05BV, UVS-05BS
UVS-C
“Matoi”, UVS-C, is centrally managed flame detector that detects ultraviolet rays contained in a flame quickly, issues a sound alarm and outputs contact at the same time.
After the alarm, the detector keeps lit red for 50 minutes, so even if more than one detector is installed on one line, it is possible to identify the alarmed detector at scene of the fire.Because it is wiring type, it can interlock with other equipment as well as remote monitoring.When connecting to the centralized receiving device, PCP-10, the corresponding line is displayed and will be notified by buzzer.
Up to 100 detectors can be connected with 10 lines.
Compatibility: “PiCOEYE”, UVS-02CTB, UVS-04CTV, UVS-06CTV, UVS-06CS
PCP-10
The flame monitoring receiver, PCP-10, is dedicated receiver for centrally managing the flame detector. When the sensor detects a flame, 85db buzzer warning is issued on the receiver, and it will inform you by LED blinking indication of the corresponding line.
Up to 100 detectors are possible when connecting “Matoi”, UVS-C.
If you are thinking of installing the flame detector “Matoi”, please feel free to contact us first.
